Stud Bolts

STUD BOLTS ASTM A193 GRADE B7 B16

INDANA STEEL Is The Manufacturer Of Fastening Systems Like Threaded Stud Bolts,Foundation Bolts, J Bolts,Hex Bolts Etc.Stud Bolts Manufactured By INDANA STEEL Carry A Warranty Of 24 Months.Thus Quality Will Not Be A Challenge For The Procurement Team When You Are Buying From Us.We Thoroughly Understand The Catastrophic Damage A Sub Standard Fastener Can Cause.

Full Threaded Stud Bolts:

Stud bolts are threaded rods used in Chemical, Oil and Petrochemical Industries for high pressure flange connections. Flanges are fastened together with the help of stud bolts and nuts. The nuts used in the tightening of flanges are generally of hexagon or heavy hexagon type depending upon the pressure and other piping system requirements. Flange connections are also fastened with traditional solutions like Hex Bolts. Hex bolts are very similar to stud bolts in terms of threading but have a forged hexagon head. However stud bolts are preferred over hex Bolt because during tightening and toque application, studs do not twist.

ASME B16.5 is primarily the dimensional standard for ASTM Stud bolts. This defines the Dimensional requirement primarily i.e. length and the diameter of stud Bolt to be used for the tightening of flanges.Whereas ASME B1.1 defines the threading requirements. Most commonly used thread form is the symmetrical V profile thread with 60 degree angle. ASTM standards define clearly every specific criteria starting from Material grade,Heat treatment,Mechanical & Chemical properties,Stamping,Inspection,acceptance and rejection requirements.The most common grade that we work with is ASTM A 193.We actively manufacture the following grade of stud bolts:

Process To Purchase Indana Stud Bolts For Your Industrial Needs:

1) Email Us Your Complete Stud Bolt Requirement On info@indanasteel.com along with the delivery time required.

2) We will respond back with a competitive quote in the next 12 hours.

3) After the receipt of a confirmed Purchase Order From your side, we will deliver the material within the agreed delivery time along with complete quality & material test certificate.

Full Threaded Stud Bolts:

Stud bolts are threaded rods used in Chemical, Oil and Petrochemical Industries for high pressure flange connections. Flanges are fastened together with the help of stud bolts and nuts. The nuts used in the tightening of flanges are generally of hexagon or heavy hexagon type depending upon the pressure and other piping system requirements. Flange connections are also fastened with traditional solutions like Hex Bolts. Hex bolts are very similar to stud bolts in terms of threading but have a forged hexagon head. However stud bolts are preferred over hex Bolt because during tightening and toque application, studs do not twist.

ASME B16.5 is primarily the dimensional standard for ASTM Stud bolts. This defines the Dimensional requirement primarily i.e. length and the diameter of stud Bolt to be used for the tightening of flanges.Whereas ASME B1.1 defines the threading requirements. Most commonly used thread form is the symmetrical V profile thread with 60 degree angle. ASTM standards define clearly every specific criteria starting from Material grade,Heat treatment,Mechanical & Chemical properties,Stamping,Inspection,acceptance and rejection requirements.The most common grade that we work with is ASTM A 193.We actively manufacture the following grade of stud bolts:

ASTM A193 Gr B7

ASTM A193 Gr B7 stud Bolt are manufactured from chromium molybdenum ferritic alloy. B7 stud bolt have a standard temperature range of minus 29 degree Celsius to 427 degree Celsius and are used in flanges of standard ASTM A105. Recommended nuts for b7 stud bolts are grade 2H Hex nuts.

GRADE B7 stud bolts are generally supplied in finishes such as Plain,Blackening,Zinc plated(Electroplated),Cadmium(Yellow),Teflon coating(blue) etc according to the nature of application and environment.

ASTM A193 B16 Stud Bolts

Grade B16 stud bolt are used in high temperature & high pressure environment.These Stud Bolts are very similar to Grade B7 Stud bolts but the alloy contains an additional element called Vanadium. Vanadium brings to the alloy high strength and heat resistance which is very critical to Grade B16 as these are used in very high temperature environment.Grade B16 stud bolts can with stand temperatures up to 537 degree Celsius.Recommended Hex nuts for ASTM A193 B16 stud bolt are Grade 4 or Grade 7 nuts.Grade 4 nuts are slowly being substituted with Grade 7 nuts.Grade 7 nuts have chromium in it which gives it high strength and increases its corrosion resistance.Grade B16 stud bolts are generally used with ASTM A283 or GrF11,F22 flanges.Brand Name Under which We Produce Stud Bolts Are Indana Stud Bolts, Indana Fasteners, JJ Stud Bolts, JJ Fasteners & RF Stud Bolts

SS STUD BOLTS

We Manuufacture Stainless Steel SS Stud Bolts In India. Stainless Steel SS Stud Bolts Are Used In Various Industries In India. SS Stud Bolts Are Generally Corrosion Free & Are Available In Various Length & Sizes. To Get A Quote For YourStain Less SS Stud Bolt Requirement, Contact Us On: info@indanasteel.com

HSFG BOLTS

We Are A Manufacturer Of HSFG Bolt In India. High Tensile Alloy Rounds Are Used Fo HSFG Bolts. These Are Used As Structural Fasteners. For This Reason Reliability Of HSFG Fasteners Is Very High. We Make Sure That All Our Hsfg Bolts Are Made From The Best Alloy Steel & Goes Through A Series Of Checks. Hsfg Bolts Are Also Known As High Strength Friction Grip Bolt.

Hex Bolts

INDANA STEEL Is A Leading Manufacturer Supplier & Exporter Of Hex Bolts From India To China, Usa, Saudi Arabia, Dubai, Australia. Hex Bolts Are Similar To Threaded Rod But Have A Hex Head On One End. Hex Bolts Aare Laso Mated With A Singe Nut And A Washer Is Reyoired. HEx Nuts Are Available In Various Materials Like High Tensile (ASTM A193 B7 B16 Hex Bolts) Ms Hex Bolts, SS Hex Bolts, GI Hex Bolts.

Foundation Bolts & Anchor Bolts:

Anchor Bolts & Foundation Bolts Are Used In Constructions. Foundation & Anchor Bolts Are Used To Firmly Attach Objects With The Concrete Structre Of The Building. Foundation & Anchor Bolts Helps In Stabilising The Structure Of The Building & Hence Proper Care Must Be Taken While Manufacturing Foundation & Anchor Bolts. Foundation & Anchor Bolts Are Used For Both Industrial & Residential Structures. We Are A Leading Manufacture & Exporter Of Foundation & Anchor Bolts To China Usa Saudi Arabia Dubai, Australia.

Threaded Rods

Threaded Rods Are Used As A Fastener & Also For Various Industrial Applications. Threaded Rods Are Made From Various Material Like MS Threaded Rod, SS Threaded Rod, Gi Threaded Rods, High Tensile Tensile Thereaded Rods. Threaded Rods Are Available In Various Sizes & Diffrent Length. We Also Offer Various Coating On Our Threaded Rods Like PTFE, Xylan Etc. We Export Our ASTM A193 B7 B7M B16 Stud Bolts To China Saudi Arabia, Dubai, UAE, ABU DHABI, Qatar, Riyadh, AL Jubail, Australia, USA, UK, Scotland, Portland.

Download ASTM A193 Grade B7 Stud Bolts Properties Download ASTM A193 Grade B16 Stud bolts properties Download ASTM A193 Grade B7 B16 Studs & nuts properties

We also provide the following coating on our ASTM A193 B7 B7M B16stud bolts when requested by the client